MOTOMAX HIGH PERFORMANCE CHAIN FOR S1000RR 2019+

MOTOMAX HIGH PERFORMANCE CHAIN FOR S1000RR 2019+

Motomax offers high-performance Super X-Ring motorcycle chains designed for strength and a lightweight feel, while SBK Motoparts is a retailer that sells motorcycle parts, including some Motomax products. Motomax is a China-based manufacturer with extensive experience in producing chains, sprockets, and other motorcycle components.
About Motomax
Manufacturer: Motomax Racing is a Chinese manufacturer and exporter specializing in high-performance drive components for motorcycles.
Product Focus: They produce high-quality chains, sprockets, and brake calipers.
Design: Motomax’s Super X-Ring chains are known for their light-weight design and high strength, achieved through advanced sealing technology.

SFR Super O-Ring chain is a light-weight design of high-performance sealing chain, maintaining maximum strength while reducing the chain width and weight. The optimized O-ring overcomes the shortcomings of ordinary sealing chain, offering 150% lifespan of ordinary O-ring.

SELECTION & INSTALLATION

1.Be sure to consult your distributor / local dealer or check with SFR chain catalogue or application chart whether this chain and connecting link are applicable for your motorcycle. Improper selection and use may cause serious damage or injury.
2.Cut the old chain at its joint part. If your motorcycle came with an endless chain or a chain with Rivet type connecting link(ZJ), use SFR Cutting & Riveting Tool or similar cutting tool.
3.Fit the new chain to the end of the old one, using a new connecting link. By turning the rear wheel, the new chain will come in position

SELECTION & INSTALLATION

We strongly recommends you to lubricate a new connecting link before connecting both ends of the new chain(Fig. B) Clip type connecting link (FJ,RJ) The open end of the clip must be set opposite the chain drive direction(Fig. C). FJ type connecting link has Press Fit Outer Plates that require SFR Cutting &Riveting Tool to press on the side plates. Rivet type connecting link(ZJ) Use MOTOMAX KM500R Cutting & Riveting Tool to press fit connecting link plates and precisely rivet pin head by flare dimensions we recommend. 5.For chain sag adjustment, follow the recommendation in motorcycle owner’s manual. Standard chain sag with the load of riders is 10 mm